CUMMINS FAULT CODE 235

By /

ADVERTICEMENT

cummins insite keygen
mk:@MSITStore:C:\Users\HP\Desktop\Backup\Insite\Cummins%20FIS\F


FAULT CODE 235

Coolant Level - Data Valid But Below Normal Operating Range - Most Severe Level

Overview


CODE

REASON

EFFECT

Fault Code: 235

Coolant Level - Data Valid But Below Normal Operating

Industrial: Calibration dependent progressive derate and

PID:

Range - Most Severe Level. Low engine coolant level

possible engine shutdown with increasing time after alert.

SPN: 111

detected.


FMI: 1



LAMP: Red



SRT:



Coolant Level Sensor 1 Circuit - Industrial Engine


Coolant Level Sensor 1 Circuit - Marine Engines


Coolant Level Sensor 1 Circuit - Power Generation En


Circuit Description

The coolant level sensor 1 monitors the engine coolant level within the coolant system and passes information to the engine control module (ECM) through the original equipment manufacturer (OEM) harness and engine harness.


Component Location


The coolant level sensor 1 is typically located in the radiator top tank or surge tank. Refer to the OEM service manual for location.


Shop Talk


This fault code goes active when the coolant level inside the radiator top tank or surge tank drops below the sensor level. Fill the top tank with coolant. Refer to Troubleshooting Fault Code t05-235.

Last Modified: 28-Nov-2012

Copyright © 2000-2010 Cummins Inc. All rights reserved.

Related Posts

Scroll to Top